to main page
send e-mail


Recent Projects Gallery!

Just Completed!
Come see some of our completed projects in the
Tri-State Area.
Click on the link below to see our BBB Review.

T. Rainwater Construction, LLC, Construction & Remodeling Services, Springdale, AR
Join Us on LinkedIn!

View Troy Rainwater's profile on LinkedIn
Follow Us on Facebook!

T-Rainwater Construction LLC

Promote Your Page Too

Construction Equipment Offered with Operator


Crane
SkyTrack
Scissorlift
Forklift
Backhoe
Tractors
Ask Us, We Can Get It!

Crane

A crane is a type of machine, generally equipped with a hoist, wire ropes or chains, and sheaves, that can be used both to lift and lower materials and to move them horizontally. It is mainly used for lifting heavy things and transporting them to other places.
Back to Top


SkyTrack

It has a removable bucket and forks, the machine extends up to 42 feet with a 10,000 pound load.
Back to Top


Scissorlift

A scissor lift is a type of platform that can usually only move vertically. The mechanism to achieve this is the use of linked, folding supports in a criss-cross "X" pattern, known as a pantograph (or scissor mechanism). The upward motion is achieved by the application of pressure to the outside of the lowest set of supports, elongating the crossing pattern, and propelling the work platform vertically. The platform may also have an extending "bridge" to allow closer access to the work area, because of the inherent limits of vertical-only movement. The contraction of the scissor action can be hydraulic, pneumatic or mechanical (via a leadscrew or rack and pinion system). Depending on the power system employed on the lift, it may require no power to enter "descent" mode, but rather a simple release of hydraulic or pneumatic pressure. This is the main reason that these methods of powering the lifts are preferred, as it allows a fail-safe option of returning the platform to the ground by release of a manual valve.
Back to Top


Forklift

A forklift truck (also called a lift truck, a fork truck, or a forklift) is a powered industrial truck used to lift and move materials short distances.
Back to Top


Backhoe

A backhoe, also called a rear actor or back actor, is a piece of excavating equipment or digger consisting of a digging bucket on the end of a two-part articulated arm. They are typically mounted on the back of a tractor or front loader. The section of the arm closest to the vehicle is known as the boom, and the section which carries the bucket is known as the dipper or dipper-stick (the terms "boom" and "dipper" having been used previously on steam shovels). The boom is generally attached to the vehicle through a pivot known as the king-post, which allows the arm to slew left and right, usually through a total of around 200 degrees. However, in "360� excavators" it is attached to a turntable, allowing continuous revolution. Modern backhoes are powered by hydraulics.
Back to Top


Tractors

A tractor is an engineering vehicle specifically designed to deliver a high tractive effort (or torque) at slow speeds, for the purposes of hauling a trailer or machinery used in agriculture or construction. Most commonly, the term is used to describe a farm vehicle that provides the power and traction to mechanize agricultural tasks, especially (and originally) tillage, but nowadays a great variety of tasks. Agricultural implements may be towed behind or mounted on the tractor, and the tractor may also provide a source of power if the implement is mechanised.
Back to Top


Just Call Us!

Any equipment you might need, we will have access to it.
Back to Top
 
Registered 2015 T-Rainwater Construction LLC.
All rights reserved.
Terms of Use | Privacy Statement